Download catalogue Waterproofing EPDM membrane Accessories for EPDM Dreinage slabs Geotextiles and anti-roots Ecological borders Lighting Bio-mechanical filters Filters for phosphates Filter materials Floating islands Aerators and air pumps Fountains and water blades Low consumption pumps and sterilizers Flowform waterfalls Raccorderia idraulica e accessori Cleaning and maintenance Books on natural ponds Constructed wetlands

Accessories

Accessories
Technical sheets

Firestone EPDM rubber panels can be joined together with the rubber tape adhesive Firestone QuickSeam® Splice Tape and specific primers. This technology is easy to apply and is based on an EPDM / Butyl tape that greatly simplifies the process on site, ensuring excellent resistance to the joints. There are now millions meters of rubber tape adhesive Firestone QuickSeam® SpliceTape that have been installed successfully in a variety of environmental conditions.

In addition to the tape, there is a series of related products that are used to solve all your needs. These are the available products:

Firestone accessories
	Splice Wash - Cleaner Degreasing detergent (to clean the membrane before applying the other products). With 1 liter you can clean about 6 square meters or 1 lt for 30 linear meters.
	Quick Prime Plus - Primer Product used for the welding of the panels (acts as a preparation for the splice tape to be applied with the applicator pad): 1 liter per 10 linear meters. Pails of 0,95, 3,78 and 11,36 liters.
	QuickSeam® Splice Tape - Ribbon Bi-adhesive band necessary for splicing the panels (to be used after cleaning with SpliceWash and the application of QuickPrime Plus). Dimensions: 7,62 cm x 30,5 meters.
	QuickSeam Form Flash - Raw rubber It is a raw rubber (EPDM) unvulcanized coupled at the factory to a layer of tape (Splice Tape). With a thickness of 1,52 mm, it is suitable to close also complex details and to seal irregular contours. It is used after cleansing with SpliceWash and the application of QuickPrime Plus. Length: 30,5 mt - Width: 23 or 30 cm.
	QuickSeam Pipe Flashing Product used for the passage of pipes in the wall from 2,5 to 15 cm of diameter (for small pressures). It is used with the Quick Prime Plus.
	QuickSeam SA Flashing - liner/ribbon EPDM rubber panel covered with a layer of QuickSeam. Suitable for strengthening and repairs. It is used after cleaning with Splice Wash and the application of QuickPrime Plus. Width: 45 cm - Lenght: 15.25 mt.
	QuickSeam Batten Cover Strip Strips used for a correct closure of the folds (to be used after cleaning with SpliceWash and the application of QuickPrime Plus). Width: 15,24 cm - Lenght: 30,50 mt.
	QuickSeam Geomembrane Patch - Patch for repairs Squares 10x10 cm of EPDM membrane with rounded corners and tape
	EasyCorner In Prefabricated corners made of vulcanized EPDM designed to facilitate details in formal ponds and make 90° cut corners watertight. They have to be used in combination with the Firestone EasySealant. Video EasyCorner IN - Inside Corner Video EasyCorner IN - Outside Corner
	EasyCorner Out Prefabricated corners made of vulcanized EPDM designed to facilitate details in formal ponds and make 90° cut corners watertight. They have to be used in combination with the Firestone EasySealant. Video EasyCorner OUT - Inside Corner Video EasyCorner OUT - Outside Corner
	Bonding Adhesive Spray Neoprene based glue for bonding the EPDM membrane on surfaces such as concrete, wood and other materials. It has a coverage of 1,5 square meters with 750 ml.
	Bonding Adhesive Spray pressurized canister 14 l (BA-2017S) with gun and tube 3,5 m (max. 45 sm) Sprayable solvent-based contact adhesive specifically designed for bonding Firestone EPDM membranes to wood, metal, concrete and other acceptable substrates.
	Lining Bonding Adhesive pail 20 l (BA-2017) Solvent-based contact adhesive designed specifically for bonding Firestone EPDM geomembranes to wood, metal, concrete and other acceptable substrates.
	Lap Sealant HS Black rubber sealant used to refine the details made with SA Flashing and Form Flash and other products. A cartridge for 7 meters.
	Water Block Waterproof mastic used as a gasket to prevent water infiltration behind mounting bars or flanges or aluminum bars for finishes. A cartridge for 3 meters.
	EasySealant Superior quality adhesive sealer based on MS polymer designed to seal, bond and repair PondEasy EPDM membranes.
	Applicator pad Its unique three-dimensional structure allows optimal implementation of the Quick Prime Plus.
	Support with handle for the applicator pad With the quick connection of the application pad and a comfortable grip, it allows a precise application of Quick Prime Plus.
	Quick scrubber kit It contains 30 application pads and 4 supports with handle.
	Brush pot 10 cm
	Rollers Silicone rubber roller 4 cm Silicone rubber roller 8 cm Narrow metal roller Teflon "V" roller
Laying accessories
	Erasable marker pen (white)
	Bucket - 8 liter
	Aluminum bar for finishes
	Contact adhesive - Toluene free Pulverized contact adhesive (20 liters) per compressor. With 1 lt it sticks 3 sqm. Toluene free.
	Professional scissors for liner Professional scissors made of carbon steel.