Cleaning accessories and ponds maintenance

Ponds cleaning pump

Self-priming pump stainless steel with flexible impeller. The impeller, deforming inside the steel body, ensures a speedy suction up to 5 meters and a transfer of the liquid to the outlet in a continuous and gentle manner. Furthermore, the low speed of rotation makes it suitable to transfer of delicate, fragile liquids and with suspended solids.

This product is characterized by a high simplicity of construction thus ensuring rapid interventions for cleaning and maintenance.
The pump is sold with a stainless steel trolley.

The cleaning kit includes:
- Pump
- Suction element
- Telescopic handle 180-360 cm
- Flexible pipe diameter 40 mm - length 25 m for input
- Flexible pipe diameter 40 mm - length 25 m for output
- Prefilter basket 1' 1/2 with fittings
 
Flow: 9.000 l/h
Max height: 20 meters
 

Phospat Acute - binder for phosphates

If the phosphate concentration is higher than 1 mg / liter is recommended to use PHOSPAT Acute as a pretreatment before installing a cartridge filter.
Phospat Acute acts as flocculant and precipitating agent improving the clarity of water before filtration.
 
Doses: 1 liter of PHOSPAT Acute falls till 40 gr of phosphates.
• Manual Dosage: 0,2 liters for a natural pond of 100 m3 per week.
• Automatic Dosage: diluite 1 liter of liquid Phospat Acute in 10 liters of water and and titrate the solution by means of any type of automated dispenser.

Pond Pro - probiotic bacteria

 
Pond Pro is a powerful probiotic concentrate for the maintenance of ponds and swimming ponds. The enzymes and probiotic bacteria ensure the removal of excess organic material. This helps improve the turbidity and odor of the water and prevents the buildup of organic substance. In addition, Pond Pro improves the microbiology of the water and reduces the risk of problems with pumps and filters. Pond Pro is 100% organic and non-toxic.
5 Litres of Pond Pro for single use is suitable for 80,000 litres; for annual maintenance it is suitable for 15,000 litres.
 
Doses:
• Initial treatment: 20 ml Pond Pro per 1,000 litres 2x every 3 days.
• Subsequent treatment: 15 ml Pond Pro per 1,000 litres of water/week.
 
Directions for use:
• Shake product before use.
• Dilute the product with pond water in a clean watering can and distribute it well over the surface of the water with a sprayer.
• Pond Pro is resistant to water temperatures between 5 °C and 70 °C, with a pH between 5.5 and 9.
• Store the products between 5 °C and 45 °C, out of direct sunlight.
• Keep out of reach of children.
• If medical advice is needed, have product container or label at hand.

Alum flocculant

Turbidity of the water is caused by the ultra-fine colloidal particles of clay. These particles are negatively charged and remain in suspension.
The positive ions react with these clays causing them to coagulate into larger particles which precipitate.
The Alum (sack of soluble powder of 25 kg) with doses of 25-30 mg/liter (30 g/m3) has been proven effective to reduce water turbidity by precipitating particles in suspension.
It is also a binder for phosphates. The Alum lowers the pH of water. Using this product, you should check that the water hardness does not fall down to too low values as well as the pH.
» Technical sheet for Alum «

Oxyclean

Releasing active oxygen, Oxyclean (soluble powder bucket of 25 kg) increases the amount of dissolved oxygen in the water, oxidizes death organics substances and also destroys thread algae within 24 hours.
Shortly after the application is already possible to start cleaning.
It increases the oxygen content in the pond for effective preventive measures against the spread of parasitic and bacterial diseases in fish.
 
Doses:
30 – 50 g of Oxyclean per 1.000 liters of water.
As a preventive measure, add a dose of 20 g per 1,000 liters of water per week.
» Technical sheet for Oxyclean «

 
For nets, telescopic handles, brushes and all other accessories for pond cleaning, see the catalog.